 |
|
|
Diode Laser Concepts, Inc. offers the most rugged Industrial Laser Module on the market today. Our unique packaging of the Industrial Module, with industry standard electrical connectors fabricated into the module body, greatly simplifies fixture modifications, moving of modules, and module upgrades or replacements. Instead of a lengthy mechanical/electrical procedure followed by an optical realignment, DLC's modules can be changed in less than a minute, eliminating costly machinery down time. Their internal driver circuitry utilizes automotive electronics to provide maximum surge and static protection to the laser diode.
- Surge, Static, and Reverse Polarity Protection
- Variety of Wavelengths and Beam Configurations
- Fan Angles for Line Generation
- Hard Coat Anodization keeping the case at neutral potential
- Scratch Resistant Sapphire Window
- Industrial Connectors
- All units aimed to within 2mrad of the mechanical axis
Click here for a full PDF data sheet
Wavelengths Available
375nm, 405nm, 532nm, 635nm, 655nm, 670nm, 780nm, 808nm, 830nm
*Others available upon request
Housing Sizes
Ø19.05mm
Length 56.5mm (DC version) or 65.2mm (M12 version)
Beam Profile
Elliptical Spot, Round Beam, Crosshair, Line, Uniform Line, Diffractive Optical Element Patterns
Output Power
0.97mw - 500mW
Beam Characteristics
Lines/Crosshair 90°, 70°, 60°, 45°, 30°, 20°,10°, 5° - Focused or Collimated
Spots/Round Beams Focused or Collimated
Electronics/Power Supply
Standard CW (2 wire), Modulated TTL (3 wire), Variable Output Power (3 wire)
5VDC or 24VDC
Interconnects
DC, M12, M8
Product Specifications
| External Housing Specifications | |
| Housing Material | Aluminum, Hard Anodized (Type III, Class 2 Anodization, Electrically Isolated) |
| Exit Aperture Protection | Sapphire Window |
| Customization | Dimensions, Materials, Exit Aperture Protection |
| Electrical Specifications | |
| Operating Voltage | 5VDC Regulated ± 1% (Standard), 24VDC (Optional) |
| Load Current | Varies with Output Power and Wavelength |
| Load Current vs. Temperature | 0.7mA/°C Nominal |
| Continuous Wave (Standard Driver) | CW to 1kHz, Full Depth Modulation |
| Turn on Time | <0.1s |
| Electronic Protection | Reverse Polarity, Over Voltage, Surge Protection |
| Interconnect | IP68 M12 X 1 Male Receptacle (Standard), 2.5mm Male DC Power Jack (Optional) |
| Customization | Operating Voltage, Interconnect |
| Environmental Specifications | |
| Operating Temperature | -10°C to 50°C (60°C, 70°C, 80°C) |
| Storage Temperature | -40°C to 85°C |
| Static Contact Discharge Immunity | >12kV |
| Dust/Water Resistant | Yes (Sealed Housing) |
| Customization | Operating Temperature, Dust/Water Resistance |
| Optical Specifications | |
| Wavelength Stability | 0.25nm/°C Nominal |
| Optical Power Range | Varies with Specific Laser Choice and Fan Angle |
| Power Output Stability at 25°C | <1% Fluctuation over 60 Minutes |
| Power Output vs. Temperature | <0.5%/°C Nominal |
| Exit Beam Size | 5.0mm x 1.2mm, 6.1mm x 1.2mm |
| Beam Divergence | <0.7 mrad Nominal, Varies with Optical Configuration |
| Standard Line Fan Angles | 5°, 10°, 20°, 30°, 45°, 60°, 70°, 90° |
| Line Thickness | `1mm @ 1 Meter Nominal |
| Line Thickness Divergence | <0.5mrad Nominal, Varies with Optical Configuration |
| Line Intensity Profile | Gaussian, (Uniform Line Available Upon Request) |
| Lens Material | Glass |
| Customization | Wavelength, Power Output, Spot Size, Fan Angle, Line Thickness, Line Intensity Profile |
| Pointing Specification | |
| Accuracy | <2mrad |
| Stability vs. Temperature | <10μrad/°C |
| Customization | Accuracy |
| Reliability/Regulatory Specifications | |
| Laser Lifetime | >30,000 hrs at 25°C |
| Certification/ Regulatory | CE/ CDRH |
| Warranty | 2 Years |
| NOTE Custom Products may/may not conform to these specifications. | |
