Diode Laser – Options and Accessories: A Wealth of Possibilities
Laserline offers a large selection of additional components for its diode lasers, which optimize the beam source or supply unit for a range of special applications. These include various exchangeable standard and special optics, scanner systems for plastics welding and beam switches for multi-station operation.
|
|
|
Homogenizing optics with connection for pyrometer |
Cutting head for fiber-coupled diode lasers |
Processing head with monitoring camera, cross jet and quick change cover slide |
|
|
|
Brazing optics for fiber-coupled diode laser with seam tracking by filler wire |
Coating head for diode laser with integrated sensors |
Welding head with double pressure finger |
DioScan
- Beam scanner for quasi-simultaneous welding of plastics
- Control via a separate PC or programmable memory card
- Designed for laser power of up to 6,000 W
Beam Switch
- Up to six exits (time-sharing)
- Efficient multi-station operation
- Flexibility and safety
- Integrated beam absorber
- Internal function monitoring
- Fast switching times
- Bus communication
DioScan |
focal length |
f = 80 mm |
f = 160 mm |
f = 217 mm |
f = 434 mm |
min. spot-Ø |
0.25 mm |
0.5 mm |
0.7 mm |
1.3 mm |
scan area [mm²] |
30 x 40 |
100 x 100 |
130 x 130 |
260 x 260 |
Values are based on: 200 µm fiber; further focal lengths available on request |
Accessories
Welding of Plastics |
Hardening |
Cutting |
- Beam scanner: DioScan
- Ring focus optics for simultaneous welding of circular seams
- Radial focus optic for welding of plastic tubes
- Pyrometer and CCD camera for process monitoring
|
- Optimized beam geometry for every application, e.g. 40 x 8 mm², 30 x 10 mm², 15 x 15 mm²
- Integrated pyrometer for temperature measurement and control at the surface
- Vario optics for manual selection of spot dimensions, e.g. 3 x 6 mm² to 3 x 18 mm²
|
- Laser cutting head
- Exchangeable cutting nozzle
- Cover slide
- Tactile or capacitive distance regulation
- Spot sizes of 0.15 – 0.5 mm
- Integrated gas feed
- Crash sensor
|
Welding of Metals |
Brazing |
Cladding and Coating |
- Integrated weld monitor
- CCD camera
- Cover slide monitor
- Cross jet
- Shield gas nozzle
- Pressure finger or pressure roller
|
- Controlled wire feeding with integrated gas feed
- Weld seam tracking
- Cross jet
- Cover slide monitor
- CCD camera
- Tactile or camera-guided seam tracking
- Crash sensor
|
- Powder or wire cladding
- Coaxial powder feed
- Integrated shield gas feed and cooling
- Integrated sensors for process monitoring
- Dust protection
|
Control system upgrade |
Further options |
- Profibus, Interbus, Device Net, Ethernet connection, Profi-Net
- PC control: LL Control Software
- Separate control panel
- Wavelength selection
- Wavelength stabilization for pump applications
- Extended programming and interaction functionality
|
- Visible pilot laser
- 90° beam deflection
- Cover slide cassette
- Fiber length up to 100 m
- Twin spot optics
- 1-inch and 2-inch optics
- Additional protective elements for special environmental conditions (extreme dust, high humidity)
- Teleservice via safe VPN connection
- separate user panel
- water chiller with compressor
- optics chiller
|
|
