CO2 Lasers
48 Series Lasers
Synrad’s original “all-metal” tube technology opened the door for sealed CO 2 lasers in many industrial applications. After 20 years, it remains the industry standard for performance, reliability, long lifetime and low cost.
The laser tube is a rigid box structure design that provides an ultra-stable platform for the laser resonator. Synrad’s
48-series tubes are mounted into an H-shaped heat sink extrusion that also serves as the chassis for the drive electronics. This guarantees that the laser will withstand the harsh requirements of modern industrial environments.
The all-metal sealed tube design and proprietary manufacturing process ensure high gas purity, essential for long operating lifetimes. |
|
|
With 100,000 Synrad lasers operating worldwide, Synrad is the only CO 2 laser manufacturer that can boast of proven operating lifetimes in excess of 45,000 hours (at which time, a simple and inexpensive gas refill returns the laser to full operation).
Synrad lasers can be operated from 0-100% duty cycle, with laser power adjusted using a pulse width modulation (PWM) control. The laser is controlled directly with a TTL signal (rear-mounted BNC connector). Alternatively, a DB-9 connector provides remote access to all laser functions, including laser control, fault conditions monitoring, remote interlock, and failure shutdown options.
All 48-series lasers operate from standard 30VDC power supplies, and can be either fan-cooled ( 48-1 and 48-2 models), or water cooled. Synrad’s 48-series lasers are ideal for incorporation into marking, engraving, and small cutting systems, where performance, low price and high reliability are essential.
|
