3D Production System: Fortus 250mc
The Fortus 250mc is our most affordable 3D production system, and it delivers flexibility and reliability. It's the only Fortus 3D Production System that uses ABSplus, which is up to 40 percent stronger than our standard ABS material.
System Highlights
- Three layer resolutions
- Nine material colors plus custom color options
- Most affordable Fortus system
System Features
Model Material:
ABSplus-P430
|
|
 |
Support Material:
Soluble support for ABSplus
Material Bays:
- 2 auto-load cartridge bays of 56.3 cu. in. each
- 1 build material bay
- 1 support material bay
Build Size:
254 x 254 x 305 mm (10 x 10 x 12 in.)
Layer Thickness:
Multiple build speed options for fine feature detail and smoother surface finish.
- 0.330 mm (0.013 in.)
- 0.254 mm (0.010 in.)
- 0.178 mm (0.007 in.)
Part Accuracy:
+/- 0.0127 mm (+/- 0.005 in) or +/- 0.0015 mm per mm (+/- 0.0015 in per inch) whichever is greater*
Network Connectivity:
10/100 base T connection. Ethernet protocol.
Power Requirements:
110-120 VAC, 60Hz, minimum 15A dedicated circuit; or 220-240 VAC 50/60 Hz, minimum 7A dedicated circuit.
Regulatory Compliance:
CE / ETL
Special Facility Requirements:
- Maximum room temperature of 86° F (30° C)
- Relative humidity range: 30-70%, non-condensing
*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
|
