SPECIFICATIONS

System Highlights: 

• 70% greater throughput over the Fortus 200mc
• High-accuracy and repeatability 
• High resolution and feature detail
• Two build envelope options 
• Can build in multiple colors 

System Size (XYZ): 

• 50.45 x 35.25 x 77.25 inches (1281 x 895.35 x 1962 mm) 

Standard Capacity Build Envelope:

• 14 x 10 x 10 inches (355 x 254 x 254 mm)
• Two auto load canister bays of 92 cubic inches each
• One build material bay
• One support material bay

Large Capacity Build Envelope Option:

• 16 x 14 x 16 inches (406 x 356 x 406 mm)
• Four auto load canister bays of 92 cubic inches each
• Two build material bays
• Two support material bays

Thermoplastic Build Materials:

• ABS-M30 thermoplastic
• PC-ABS thermoplastic
• PC thermoplastics
  

Layer Thickness (material dependant):

• 0.013 inch (0.330 mm)
• 0.010 inch (0.254 mm)
• 0.007 inch (0.178 mm)
• 0.005 inch (0.127 mm) 

Achievable Accuracy:

• Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater(+/- .127mm or +/- .0015 mm per mm whichever is greater).*

Network Communication:

• 10/100 base T connection. Ethernet protocol 

Operating Environment:

• Maximum room temperature of 85°F (29.4°C).
• Maximum room dew point of 78°F (25.6°C). 

Power Requirements:

• 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required) 

Software:

• Insight^TM 
• Control Center^TM
• FDM TEAM^TM (optional advanced software)

* Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield. See Fortus 400mc/360mc accuracy white paper for more information.