FORTUS 400mc

SPECIFICATIONS

System Highlights:

• Has the most material options. Choose material(s) ideal for your applications.
• Larger build envelope and multiple material bays for longer unattended operation
• 2.0 X's faster than the Fortus 200mc
• Best surface finish and feature detail with 0.005 inch (0.127 mm) layer thickness
• Most configurable system
• Capable of multiple color parts in a single build

System Size (XYZ):

• 50.45 x 35.25 x 77.25 inches (1281 x 895 x 1962 mm)

Build Envelope Options:

• Base System:
• 14 x 10 x 10 inches (355 x 254 x 254 mm)
• Two auto load canister bays of 92 cubic inches each
• One build material bay
• One support material bay

Large Capacity Build Envelope Option:

• 16 x 14 x 16 inches (406 x 356 x 406 mm)
• Four auto load canister bays of 92 cubic inches each
• Two build material bays
• Two support material bays

Thermoplastic Build Materials:

• ABS-M30 thermoplastic 
• ABS-M30i thermoplastic
• ABSi thermoplastic 
• PC-ABS thermoplastic
• PC thermoplastic
• PC-ISO thermoplastic
• ULTEM* 9085 thermoplastic
• PPSF thermoplastic

Achievable Accuracy:

• Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater (+/- .127mm or +/- .0015 mm per mm whichever is greater). **

Network Communication:

• 10/100 base T connection. Ethernet protocol

Operating Environment:

• Maximum room temperature of 85°F (29.4°C)
• Maximum room dew point of 78°F (25.6°C)

Power Requirements:

• 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)

Software:

• Insight™
• Control Center™ 
• FDM TEAM™ (optional advanced software)

* ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV
**Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.