OVERVIEW

Designed and manufactured for the highest accuracy and repeatability, this production system is distinct from other additive fabrication systems. It provides part tolerances that are substantially improved over previous systems.

System Comparison Features:

• Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch whichever is greater(+/- .089 mm or +/- .0015 mm per mm whichever is greater).*
• Largest build envelope - 36 x 24 x 36  inch (914 x 610 x 914 mm) 
• The most material bays:
  2 build material and 2 support material bays for extended unattended builds
• Multiple layer thickness (build speed) options:
  0.013 inch and 0.010 inch (0.330 mm and  0.254 mm) for faster throughput
  0.007 inch (0.178 mm) for higher surface finish and feature detail
• Ideal for large parts and high volume of parts

Best Suited For:

Systems	Conceptual Modeling	Functional Prototyping	Fabrication and Assembly Tools	End-Use Parts
FORTUS 360mc
FORTUS 400mc
FORTUS 900mc

Throughput  and Capacity Comparison:

Systems	Throughput Comparison	Envelope Volume (cubic in)
FORTUS 360mc
FORTUS 400mc
FORTUS 900mc

 Build Material Options:

• ABS-M30 thermoplastic 
• ABS-M30i thermoplastiC**
• PC-ABS thermoplastic**
• PC thermoplastic
• PC-ISO thermoplastiC**
• ULTEM*** 9085 thermoplastic
• PPSF thermoplastic

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield. See Fortus 900mc accuracy white paper for more information.
**Materials will be available Q2 - 2009
*** ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV