Finishing Stations
Part Smoothing finishing process using the Smoothing Station and the Burnishing Station.
Step 1: Smooth Part Surface (Smoothing Station)
• Expose Fortus part in the smoothing chamber 10-30 seconds
• Remove from smoothing chamber, review surface finish
• Repeat until desired surface finish reached (typically 2-4 times)
Step 2: Cure Part (Smoothing Station)
• Hang part in the curing chamber of the Smoothing Station
• Part will be dry to touch in 30-45 minute
• Part will be fully cured in 12-18 hours
Step 3: Burnish Part Surface (Burnishing Station)
• Lightly blast the part with sodium bicarbonate, giving surface matte finish
• Rinse with water to remove any remaining sodium bicarbonate

|

|

|
Step 1: Smooth the
part
surface
in
Smoothing Station
|
Step 2: Cure part in
Smoothing Station |
Step 3: Burnish part surface in Burnishing Station |
|