Autoclave

Depending on the design and power input the nonrecurring warm-up time takes only 30 minutes and the pressure balance is less than 3 seconds. The fast pressure build-up with 170 degrees hot steam allows a very gentle dewaxing of the shell - before the wax starts to expand the surface is melting. Thanks to the PLC control - together with the touchscreen and click-wheel - the operation of the machine is quite simple and widely automated.

A mould trolley together with a sledge enables the easy charge of the autoclave and a safe mould handling. For the installation the following is required: 

• 400V power supply
• compressed air supply
• in and out going waterline
• exhaust pipe to guide the vapour pressure out of the room before the process ends